MitsuStyle - View Single Post

GsXtUrBo98 · 08-14-2012

So I installed a dynatek arc2 and am still having break up problems.. I was at 27psi and turned it down to 25psi and it wasn't as bad. But then I turned it down to 22psi and she goes pretty damn smooth through the gears.. I think I'm in need of a retune..

Note: I also fixed some boost leaks but there isn't any difference from before or after since they were before the maf

08-14-2012	#10
GsXtUrBo98 Join Date: Nov 2007 Location: lino lakes Drives: 98 GSX, 04 is300 Posts: 1,856	Re: GsXtUrBo98's 2G project thread So I installed a dynatek arc2 and am still having break up problems.. I was at 27psi and turned it down to 25psi and it wasn't as bad. But then I turned it down to 22psi and she goes pretty damn smooth through the gears.. I think I'm in need of a retune.. Note: I also fixed some boost leaks but there isn't any difference from before or after since they were before the maf __________________ 98 GSX (built) 03 BBY EVO dd GSX 463awhp 363awtq on DB! Last edited by GsXtUrBo98; 08-14-2012 at 07:44 PM..