MitsuStyle - View Single Post - Lucky #13...Back in the saddle....92 rt/tt

niterydr · 05-22-2012

Drained the oil today, first thing out was about a 1/2-1 gallon of coolant...that isn't good.

Poked around in the oil pan holes, found a chunk of rod, looked at the rear hole (Now that it is lifted up), GIANT hole in the block.

I don't really give a rip about the 2 bolt shortblock, just hope the heads are fine as those can get spendy.

Ordered a forged crank that should only need a micropolish and have a line on a 4 bolt block.

Also have a line on forged rods, waiting on a piston quote, and found a TD05 14B kit (7cm housings).

05-22-2012	#125
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: Lucky #13...Back in the saddle....92 rt/tt Drained the oil today, first thing out was about a 1/2-1 gallon of coolant...that isn't good. Poked around in the oil pan holes, found a chunk of rod, looked at the rear hole (Now that it is lifted up), GIANT hole in the block. I don't really give a rip about the 2 bolt shortblock, just hope the heads are fine as those can get spendy. Ordered a forged crank that should only need a micropolish and have a line on a 4 bolt block. Also have a line on forged rods, waiting on a piston quote, and found a TD05 14B kit (7cm housings). __________________ My street car runs low 11's and my race car's personal best is a mid 11....