Couple pics added.
Took out all the air shrouds, there was one under the bumper and a huge one that separated the radiator from the old air intake. Now it's pretty much open:
Got the supercharger mounted and awaiting the FMIC install. You can see the brackets below where the intercooler sits. The -4 SS line in the middle is the paxton drain line which I zip tied down low, I have to change the oil in it every 7500 miles, but I'll probably just do it every Winter when I do oil changes (probably every 5000 miles):
Here is where the install got interesting. The base model is straight forward, but the Z06 has an external oil cooler, which the previous owner installed on my base model for road racing. I didn't want to delete it, so I came up with some new brackets to have it mounted between the FMIC and condenser. I had to move the FMIC brackets about an inch forward, but everything fit and I was really happy. I know they are right up next to each other, but I was seeing 170* oil temps and only 175* coolant temps on the highway which is way colder than I expected. It's a huge f'in oil cooler, at least 6"x24".
I have an 8 rib pulley setup I'm going to install next Winter as well, I got it with my 8 rib crank pulley but didn't have the motivation to install this time. Apparently it's a huge PITA to get the PS and Alt pulleys off with the motor in the car.