MitsuStyle - View Single Post

TkrPerformance · 12-23-2011

painted the intake pipe in the basement shop last night and used the gas fire place to get it to cure between coats. also cut about 2in off the cold pipe were it comes through in to the bumper the filter was lower than the bumper.

used some vac hose to make a buffer so it does not rattle on the frame

intake all back in

12-23-2011	#68
TkrPerformance Join Date: Oct 2003 Location: edward lake Drives: toaster Posts: 6,431	Re: after 10 years its coming back to life painted the intake pipe in the basement shop last night and used the gas fire place to get it to cure between coats. also cut about 2in off the cold pipe were it comes through in to the bumper the filter was lower than the bumper. used some vac hose to make a buffer so it does not rattle on the frame intake all back in