MitsuStyle - View Single Post - 2011 Fall Dyno Day - September 24th @ Modern Automotive Performance

Pushit2.0 · 09-20-2011

I just filled out the stuff. And it might be a show, I did a leak down test on the motor a few weeks ago, trying to figure out why it started so bad and never wanted to idle under 1500rpm. Well I have 6 bent exhaust valves. I have a new set of valves and a new head gasket, so I will be at the dyno day and I plan to try and make as close to if not over the shoot out mode at 44psi. I will up date my project thread tomorrow.

~John

09-20-2011	#35
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: 2011 Fall Dyno Day - September 24th@ Modern Automotive Performance I just filled out the stuff. And it might be a show, I did a leak down test on the motor a few weeks ago, trying to figure out why it started so bad and never wanted to idle under 1500rpm. Well I have 6 bent exhaust valves. I have a new set of valves and a new head gasket, so I will be at the dyno day and I plan to try and make as close to if not over the shoot out mode at 44psi. I will up date my project thread tomorrow. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.