MitsuStyle - View Single Post

blackawdtsi · 06-17-2011

Just to make sure you have the right info...

Shimming Pivot Ball
http://www.teamrip.com/when_why_and_...ball_info.html

Pedal Adjustment
http://www.teamrip.com/clutch_pedal_...ment_info.html

Bleeding Clutch (make sure you do steps 11 and up)
http://www.teamrip.com/how_to_proper...utch_info.html

I don't know if you're running a 1g or 2g trans but maybe try installing the 2g restrictor if you're using a 1g trans.

IF all those fail you can try running an Isuzu slave. It requires a little trimming but makes the pedal lighter and engagement longer.

06-17-2011	#256
blackawdtsi Join Date: Sep 2007 Location: In my garage Drives: 2G DSM Posts: 600	Re: GsXtUrBo98's 2G project thread Just to make sure you have the right info... Shimming Pivot Ball http://www.teamrip.com/when_why_and_...ball_info.html Pedal Adjustment http://www.teamrip.com/clutch_pedal_...ment_info.html Bleeding Clutch (make sure you do steps 11 and up) http://www.teamrip.com/how_to_proper...utch_info.html I don't know if you're running a 1g or 2g trans but maybe try installing the 2g restrictor if you're using a 1g trans. IF all those fail you can try running an Isuzu slave. It requires a little trimming but makes the pedal lighter and engagement longer. Last edited by blackawdtsi; 06-17-2011 at 10:04 PM..