MitsuStyle - View Single Post

**CornFed2.4** · 06-14-2011

So I finally got to drop the trans, since I thought the flywheel bolts backed out again. Come to find out theres as tight as can be. Whats weird though, I can shake the flywheel and the crank moves. I know its possible that any crank can walk, but is this the case here? Or are my bearings just shot! I still have to drop the pan and will get to that tomorrow. Just wanted to get some opinions.

The car had a really bad vibration on acceleration and deceleration.

06-14-2011	#1
CornFed2.4 Join Date: May 2005 Location: Linwood, MN Drives: You crazy! Posts: 2,354	2.4 6 bolt crankwalk? So I finally got to drop the trans, since I thought the flywheel bolts backed out again. Come to find out theres as tight as can be. Whats weird though, I can shake the flywheel and the crank moves. I know its possible that any crank can walk, but is this the case here? Or are my bearings just shot! I still have to drop the pan and will get to that tomorrow. Just wanted to get some opinions. The car had a really bad vibration on acceleration and deceleration.