MitsuStyle - View Single Post

**mlomker** · 06-08-2011

Torqued that oil feed banjo bolt and it tightened 1/4 turn. It'd be nice if that were the issue.

I changed the oil and left the under-tray off for Friday's visit with Shane. I can't tell if the Hobbs switch is kicking the pump into high gear or not. The car gets so loud during a pull that I'm not going to hear the pump change speed. I've done a couple half-pulls to 15psi and the AFRs look good @11.2-11.3.

06-08-2011	#1
mlomker Resting In Peace Join Date: Aug 2009 Location: Heaven Drives: 94 Plymouth Acclaim/2008 EvoX Posts: 2,430	Re: Evo X upgrades Torqued that oil feed banjo bolt and it tightened 1/4 turn. It'd be nice if that were the issue. I changed the oil and left the under-tray off for Friday's visit with Shane. I can't tell if the Hobbs switch is kicking the pump into high gear or not. The car gets so loud during a pull that I'm not going to hear the pump change speed. I've done a couple half-pulls to 15psi and the AFRs look good @11.2-11.3. __________________ Modlist / Dyno Graphs / Facebook kracka--It's official, Lomker sucks at chicks!