MitsuStyle - View Single Post - Cylinder 3 Misfire, Too Rich, Help Please

white 2g awd · 06-05-2004

sorry, had my mods listed in my profile, but here they are full dejon hard pipes, 1g bov, walbro 190, 550's, safc, keydiver chip, rnr o2 elim. dp, thermal catback, evo 3, act 2600, hrc smic, the car misses at idle, and low throttle, wot is good, i start getting the cylinder 3 misfire at cruise on the interstate usually. basically should i lean it out more till i get knock on low throttle, then richen it some to take it out, so that its on the verge (can't spell) of knock, or what?

Dustin

06-05-2004	#3
white 2g awd Join Date: May 2004 Location: Des moines Posts: 34	sorry, had my mods listed in my profile, but here they are full dejon hard pipes, 1g bov, walbro 190, 550's, safc, keydiver chip, rnr o2 elim. dp, thermal catback, evo 3, act 2600, hrc smic, the car misses at idle, and low throttle, wot is good, i start getting the cylinder 3 misfire at cruise on the interstate usually. basically should i lean it out more till i get knock on low throttle, then richen it some to take it out, so that its on the verge (can't spell) of knock, or what? Dustin