MitsuStyle - View Single Post - WTB: Mechanic to do my Timing Belt on 2GA!!

niterydr · 04-08-2011

I would call Brookdale Mitsubishi. Depending upon the age of the car you want a belt, tensioner, idler pulley, tensioner pulley, balance shaft belt.

It has been a few years since I've bought the parts but I would estimate the belt to be $60, Tensioner $100, Idler pulley, $20, Tensioner pulley $25, balance shaft belt $25.

I would recommend a water pump as well while you are there, should set you back another $60 if you went aftermarket.

Pulley's, tensioner's, belts, stick with OEM. Water pump you are much cheaper going aftermarket in my opinion.

Make sure your friend has the proper tools to tension it or your special deal may end up costing you big bucks when the valves get munched by the pistons.

04-08-2011	#14
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: WTB: Mechanic to do my Timing Belt on 2GA!! I would call Brookdale Mitsubishi. Depending upon the age of the car you want a belt, tensioner, idler pulley, tensioner pulley, balance shaft belt. It has been a few years since I've bought the parts but I would estimate the belt to be $60, Tensioner $100, Idler pulley, $20, Tensioner pulley $25, balance shaft belt $25. I would recommend a water pump as well while you are there, should set you back another $60 if you went aftermarket. Pulley's, tensioner's, belts, stick with OEM. Water pump you are much cheaper going aftermarket in my opinion. Make sure your friend has the proper tools to tension it or your special deal may end up costing you big bucks when the valves get munched by the pistons. Last edited by niterydr; 04-08-2011 at 12:06 AM..