|
Re: GsXtUrBo98's 2G project thread
Quote:
Originally Posted by goodhart
Can't you just take out the nuts holding the manifold on, back the manifold off an inch to slip a nut on the threads then put it back on? I think that's what some X guys have to do with their tubular mani's.
|
The problem isn't getting the nut on its that the stud is so long that it will hit the manifold when I tighten the nuts down...
__________________
98 GSX (built)
03 BBY EVO dd
GSX 463awhp 363awtq on DB!
|