MitsuStyle - View Single Post

**Halon** · 01-04-2011

Woohoo, got the sync issue worked out. There were a couple jumpers & pots that needed to be changed / adjusted on the MS3 and MS3x boards. Everything is logging perfectly now

Hopefully this weekend I'll wire in the injector & ignition wires, and MS will then be in full control of fuel and ignition, and be just about ready for Shane

FFIM DIY:
http://my.is/forums/f221/diy-kinda-i...alysis-363346/

01-04-2011	#280
Halon Pewp Champion Join Date: Nov 2003 Location: Blaine Drives: Teh Bean Posts: 12,309	Re: Project Lex Woohoo, got the sync issue worked out. There were a couple jumpers & pots that needed to be changed / adjusted on the MS3 and MS3x boards. Everything is logging perfectly now Hopefully this weekend I'll wire in the injector & ignition wires, and MS will then be in full control of fuel and ignition, and be just about ready for Shane FFIM DIY: http://my.is/forums/f221/diy-kinda-i...alysis-363346/ __________________ B-Man - FlexFuel Mafia 1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid 1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid 2006 Bayliner 195 - Carbed 5.0 Top Speed Test Last edited by Halon; 01-06-2011 at 12:09 AM..