MitsuStyle - View Single Post

**Halon** · 11-09-2010

Yup, what Tom said would be a quick simple check. One other tid bit of info is that a stock crank has an 88mm stroke, while the typical 2.4 crank (stroker crank) would have a 100mm stroke.

You are certain that the pistons are stroker pistons?

11-09-2010	#4
Halon Pewp Champion Join Date: Nov 2003 Location: Blaine Drives: Teh Bean Posts: 12,309	Re: 6 bolt rebuild swap for 95tsi Yup, what Tom said would be a quick simple check. One other tid bit of info is that a stock crank has an 88mm stroke, while the typical 2.4 crank (stroker crank) would have a 100mm stroke. You are certain that the pistons are stroker pistons? __________________ B-Man - FlexFuel Mafia 1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid 1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid 2006 Bayliner 195 - Carbed 5.0 Top Speed Test