Pics as promised.
Wiring harness when I pulled it into the chassis...
Swapping ECU pins for my '04 ECU on the '05 Harness
Finished product, before taping with rest of the wires.
The cluster eff of wires I had to organize. Basically went through pulled all of them tight, checked for broken wires, then zip tied a few inches at a time.
Wiring job on the door harness.
After securing wires of the door harness.
Initial routing of the wires, keep in mind I have NONE of the brackets for fuse/relay box, etc.
Close to final routing of the wires, using only zip ties. I've secured all boxes, etc to make sure nothing rattles.
And the payoff... close to final product.
Yeah... booiiiii