MitsuStyle - View Single Post

tpunx99GSX · 09-30-2010

It had a 14b.
Currently the spun bottom end is in it. I would like to pull it only because of the rods and pistons that are in there, but would leave it in there with the rods and pistons in there for an extra $300. (which is insane as the rods alone retail at $750) The rods are Manley I Beam Rods, and the pistons are Mahle 040 over 8.7:1 pistons. (i will also throw in 3 spare pistons.)
I can take more pics if you would like. i am going to be cleaning the garage this weekend and will take updated picks. Nothing has changed really as i have only put on 300 miles and the rest of the time it was in the garage.

09-30-2010	#3
tpunx99GSX Tournaments Won: 3 Join Date: Oct 2003 Location: Maple Grove, MN Drives: Lancer and Durango Posts: 7,017	Re: 1992 Silver AWD Talon Shell It had a 14b. Currently the spun bottom end is in it. I would like to pull it only because of the rods and pistons that are in there, but would leave it in there with the rods and pistons in there for an extra $300. (which is insane as the rods alone retail at $750) The rods are Manley I Beam Rods, and the pistons are Mahle 040 over 8.7:1 pistons. (i will also throw in 3 spare pistons.) I can take more pics if you would like. i am going to be cleaning the garage this weekend and will take updated picks. Nothing has changed really as i have only put on 300 miles and the rest of the time it was in the garage. Last edited by tpunx99GSX; 09-30-2010 at 08:04 PM..