__________________________________________________
Sensors and Connectors
AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- wire mating connector with 12" leads for ease of installation.
- High-quality sealed sensor housings
- Mating connector and 12” leads included (sensors)
- Accurate and affordable!
__________________________________________________
TRU-BOOST Gauge-Type Controller
Combines digital accuracy with manual controller-like ease of use!
- No external interface required for programming!
- Complete system includes harness, boost hose, on-board 29 psig pressure sensor (external 75 psia optional), boost solenoid, gauge display and all necessary fittings
- Quick connect technology eases the installation process
__________________________________________________
Twin-Fire Ignition Modules
AEM’s digital multi-channel Twin-Fire Ignition is the lightest, smallest and most cost effective ignition module on the market. This unit is available in four- and eight-channel configurations, works with O.E.M. coil-on-plug and distributed spark systems, and is ideal for race applications that utilize aftermarket stand-alone engine management systems.
Legal in California only for racing vehicles which may never be used upon a highway.
- Works with coil-on plug and distributed spark systems
- 540v primary/54,000v secondary voltage energy
- 189mJ spark energy per capacitor
- Multi-Strike capability of up to 10 sparks per ignition trigger (20 degrees)
- Smallest (5.5” x 4.625” x 1.375”) and lightest (1.5lbs) CDI on the market
- Four- or eight-channel availability
- Full spark energy with battery voltage as low as 9v
- Tachometer output included
- Extruded enclosure
__________________________________________________
CDI Pencil Coil
AEM’s new CDI Pencil Coils are now available! Easily allowing the conversion to coil-on-plug ignition systems, these Pencil Coils will work with aftermarket engine-management systems. Additionally, when Pencil Coils are used in high-boost, high-RPM, or high-compression racing applications, an increase in spark energy can be seen over factory smart coils.
- Compatible with all standard automotive spark plugs including threaded tip style
- Kit includes pencil coil, connector, connector pins, pin lock and weather seals
- Available in two different lengths for optimum plug reach
- Two-wire CDI compatible coil
__________________________________________________
ECU Patch/Extension Harness
AEM's Universal ECU Patch/Extension Harnesses work with most engine management systems and allow you to install turbo timers, data loggers and other ancillary electronics without having to cut and splice into your factory wiring harness.
ECU PATCH/EXTENSION HARNESS KEY FEATURES:- Never cut/splice the factory wiring harness again!
- Easy out-of-the-car access for an ancillary wiring
- Troubleshooting can be done outside of the vehicle
- Easy removal of any device that is no longer desired
- Constructed with original ECU and harness connectors for exact fitment
- Allows for easy access to all ECU signals/wires
24 HOUR SALE! PM NOW for the Best Pricing on AEM Products that you have ever seen!