MitsuStyle - View Single Post

ghost · 07-08-2010

I didn't want to start a new thread but I'm having the same issue too. Except my motor is freshly rebuild. Had Import Engine do my whole block and clean my head. A friend and I assemble the head ourselves. I know everything has to be good, motor wise. I did a compression test and its about 120 across cause it hasn't been broken in yet. I'm getting fuel since the fuel pressure gauge is at 50psi. Only thing is spark. I got new spark plugs and spark plug wires in. When I pulled out the plugs, I can see it's getting spark cause the spark plugs do look burned. I'm stuck... Help?

quick question, the cylinder from left to right is
4321
coil is
4123

Here's my vid; I had to use a headphone to hear. http://www.youtube.com/watch?v=cALdPmSQZAw

07-08-2010	#6
ghost Join Date: Oct 2003 Location: Maplewood Drives: 92 Talon TSI AWD Posts: 89	Re: puzzling no start issues I didn't want to start a new thread but I'm having the same issue too. Except my motor is freshly rebuild. Had Import Engine do my whole block and clean my head. A friend and I assemble the head ourselves. I know everything has to be good, motor wise. I did a compression test and its about 120 across cause it hasn't been broken in yet. I'm getting fuel since the fuel pressure gauge is at 50psi. Only thing is spark. I got new spark plugs and spark plug wires in. When I pulled out the plugs, I can see it's getting spark cause the spark plugs do look burned. I'm stuck... Help? quick question, the cylinder from left to right is 4321 coil is 4123 Here's my vid; I had to use a headphone to hear. http://www.youtube.com/watch?v=cALdPmSQZAw __________________ -Ghost Last edited by ghost; 07-08-2010 at 03:50 PM..