MitsuStyle - View Single Post

URV8SUX · 07-01-2010

Huge thanks to Shane up at DB Performance for a great tune and late night up at the shop. After a horrible ignition set up for 5+ years I finally steped up my game thanks to LJ I got a M&W Pro10 with a Crane coil, and there was no more miss fire since!!! Shane and I decided to try and get a time out of the car went to B.I.R. for Proving Grounds and I got some shake down runs done. The car went 10.7@127 cause car was getting close to the wall and also went 10.8@146 on rev limiter just past 1000ft mark, just got to get the first 330' down and it might go fast! Shane and I are going to try some new cams and see if it will pick up midrange and top end power here soon!!!!!

830whp/546tq
33psi.
E85

Setup
Dart sleeves
JE pistons
Manley turbo tuff rods
OEM crank (GSR)
Stock port B16 head
Crower dual valve springs
Crower turbo cams
S372R 1.10 A/R
2200cc injectors
Great AEM tune by Shane!

Dyno video
http://www.youtube.com/watch?v=0qHdqxphsqQ
Stolen video from the track
http://www.youtube.com/watch?v=oFFQV...layer_embedded
Don't have a photo of the 830 graph but this will do.

Engine bay

Thanks for looking!

07-01-2010	#1
URV8SUX Join Date: Oct 2006 Location: hwy 694 Posts: 308	Shane+tune=830whp Huge thanks to Shane up at DB Performance for a great tune and late night up at the shop. After a horrible ignition set up for 5+ years I finally steped up my game thanks to LJ I got a M&W Pro10 with a Crane coil, and there was no more miss fire since!!! Shane and I decided to try and get a time out of the car went to B.I.R. for Proving Grounds and I got some shake down runs done. The car went 10.7@127 cause car was getting close to the wall and also went 10.8@146 on rev limiter just past 1000ft mark, just got to get the first 330' down and it might go fast! Shane and I are going to try some new cams and see if it will pick up midrange and top end power here soon!!!!! 830whp/546tq 33psi. E85 Setup Dart sleeves JE pistons Manley turbo tuff rods OEM crank (GSR) Stock port B16 head Crower dual valve springs Crower turbo cams S372R 1.10 A/R 2200cc injectors Great AEM tune by Shane! Dyno video http://www.youtube.com/watch?v=0qHdqxphsqQ Stolen video from the track http://www.youtube.com/watch?v=oFFQV...layer_embedded Don't have a photo of the 830 graph but this will do. Engine bay Thanks for looking!