MitsuStyle - View Single Post

**asshanson** · 06-14-2010

You can replace the stock 2g cam/crank sensors with a 1g style CAS on back side of the cam. Both RRE and Magnus sell an adapter for about $70-$80 that will plug the 1g CAS into both the stock 2g cam/crank plugs. I made my own but ended up buying one a few weeks later. They have a wiring diagram if you want to make your own.

I would read this: http://magnusmotorsports.com/wp-cont...02/1gina2g.pdf
It explains everything you need to do in detail. You use all the 2g motor/tranny mounts but you have to modify the drivers side one a little by grinding it down.

06-14-2010	#4
asshanson immune from paybans Join Date: Oct 2005 Location: West Des Moines Drives: poorly Posts: 4,358	Re: 7 bolt parts on a 6 bolt? You can replace the stock 2g cam/crank sensors with a 1g style CAS on back side of the cam. Both RRE and Magnus sell an adapter for about $70-$80 that will plug the 1g CAS into both the stock 2g cam/crank plugs. I made my own but ended up buying one a few weeks later. They have a wiring diagram if you want to make your own. I would read this: http://magnusmotorsports.com/wp-cont...02/1gina2g.pdf It explains everything you need to do in detail. You use all the 2g motor/tranny mounts but you have to modify the drivers side one a little by grinding it down.