MitsuStyle - View Single Post

Andrew7dg · 03-31-2010

You can run a stock head on that block and be fine. It doesn't really matter. Now if you were to upgrade the cams, then you would have to probably get better springs so you could rev it higher into the power band. It looks like it is ported and polished head so that is a good start.

I would find a 7 bolt head though (93-94). I never tried putting a 6 bolt head on a 7 bolt block. should work?...

03-31-2010	#2
Andrew7dg Built it from scratch! Join Date: Mar 2006 Location: St. Paul Drives: Currently Mitsu-less Posts: 851	Re: 7 bolt built block, 6 bolt stock head? You can run a stock head on that block and be fine. It doesn't really matter. Now if you were to upgrade the cams, then you would have to probably get better springs so you could rev it higher into the power band. It looks like it is ported and polished head so that is a good start. I would find a 7 bolt head though (93-94). I never tried putting a 6 bolt head on a 7 bolt block. should work?... __________________ "A turbo, exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster."