MitsuStyle - View Single Post

**mlomker** · 02-26-2010

Grabbed a couple 5/16ths hoses from O'Reilly's to replace the temporary lines that Shawn put in for me (3/8ths, it appears).

BlaqOPs told me that shrink-wrap is a no-no with E85 so I'll have to take a look to see if there is enough wire to re-do it with butt connectors.

I called Full Blown to ask them what the heck I do with the suction line at the bottom of the gas tank. There isn't really anything to connect it to on the FB hanger. I think there should be a fitting at the bottom of the cup so that the bottom of the pumps (which have socks on them) can 'suck' through that line from the other side of the tank.

At least that's what seems logical to me. Not that I know anything about fuel systems. lol.

02-26-2010	#311
mlomker Resting In Peace Join Date: Aug 2009 Location: Heaven Drives: 94 Plymouth Acclaim/2008 EvoX Posts: 2,430	Re: Evo X upgrades Grabbed a couple 5/16ths hoses from O'Reilly's to replace the temporary lines that Shawn put in for me (3/8ths, it appears). BlaqOPs told me that shrink-wrap is a no-no with E85 so I'll have to take a look to see if there is enough wire to re-do it with butt connectors. I called Full Blown to ask them what the heck I do with the suction line at the bottom of the gas tank. There isn't really anything to connect it to on the FB hanger. I think there should be a fitting at the bottom of the cup so that the bottom of the pumps (which have socks on them) can 'suck' through that line from the other side of the tank. At least that's what seems logical to me. Not that I know anything about fuel systems. lol. __________________ Modlist / Dyno Graphs / Facebook kracka--It's official, Lomker sucks at chicks! Last edited by mlomker; 02-26-2010 at 02:01 PM..