MitsuStyle - View Single Post

slowbubblecar · 02-19-2010

I picked up a 90 turbo FWD laser and have found a few interesting things on it. The pics below show what to do if your upper i/c pipe is flanged for a tial BOV and you don't have one.

Step 1- Find a piece of hose you can fit around the tial flange
Step 2- Tighten the hose over the tial flange and attach it to the stock hard pipe with a stock BOV
Step 3- Go to Menards and buy a rubber cap for the other end of the hard pipe. Install it.
Step 4- Use a piece of radiator hose to recirculate the BOV into the intake. Use a zip tie to ensure the hose it tight

02-19-2010	#1
slowbubblecar Big Turbo Monster Join Date: Oct 2003 Location: Hopkins Drives: GTS and E55 Posts: 1,105	New modification I picked up a 90 turbo FWD laser and have found a few interesting things on it. The pics below show what to do if your upper i/c pipe is flanged for a tial BOV and you don't have one. Step 1- Find a piece of hose you can fit around the tial flange Step 2- Tighten the hose over the tial flange and attach it to the stock hard pipe with a stock BOV Step 3- Go to Menards and buy a rubber cap for the other end of the hard pipe. Install it. Step 4- Use a piece of radiator hose to recirculate the BOV into the intake. Use a zip tie to ensure the hose it tight Attached Thumbnails __________________ Life's tough.... it's even tougher if you're stupid. 7/25/09 Motorcycle cop pulls up next to me on UNI and says "Want to race?" Me- "I don't think you would stand a chance." Cop says "probably not" and drives off. Last edited by slowbubblecar; 02-19-2010 at 09:15 PM..