MitsuStyle - View Single Post

Pushit2.0 · 02-12-2010

I still plan torun the engine on the engine dyno, but I will not loose sleep over it if I have to chassis dyno the thing.

As for the holes I plan on putting in some driving lights mounted with sheet metal. Depending on what I get there may be 2 per side. I also plan on putting in the corner lights again and I want to have working turn signals. Then I will run all the wires for the front end threw 1 connector that will be easy to disconnect for front end removal.

~John

02-12-2010	#16
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: 91 Galant VR4 I still plan torun the engine on the engine dyno, but I will not loose sleep over it if I have to chassis dyno the thing. As for the holes I plan on putting in some driving lights mounted with sheet metal. Depending on what I get there may be 2 per side. I also plan on putting in the corner lights again and I want to have working turn signals. Then I will run all the wires for the front end threw 1 connector that will be easy to disconnect for front end removal. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012. Last edited by Pushit2.0; 02-12-2010 at 02:41 PM..