[TkrPerformance]

it will be getting the swap this spring some time. if you want to do it at the same time that will not be a problem if I have the extra room.

For the mounts you can just fab them up. It is not hard. Also realy not need the roll stop mounts if you go awd you can use dsm ones then sinse you need to get rid of the stock front to back roll stop brace. I can get you a part number for the upper engine mount.

On the hydro set up. Find a hatch or 4door 89-92 for the parts. For the shifter you can use the turbo mirage set up or a shifter out of a 93-95 mirage it has a shorter shifter in it and works really well. That is what I put in the wifes hatch.

For the others.
Just use a 90 dsm harness and make a harness adaptor to go from the dsm to mirage dash harness.

Also most of the guys on 4g61t are complety dumb and hack it together. The one guy to get the adaptor harness and motor mounts from is 89mirageman. He is a great guy he is also on the other mirage board mirageperformance.net. I have sold a lot of parts to him and bought and traded with him also.
If you want to know a lot about the car I would go to the mirageperformance board.