MitsuStyle - View Single Post

Alpha D · 11-13-2009

No. Thats not the problem. I already replaced the Intake manifold. I already replaced the o rings as well as upper injector seals. The only thing i have not done yet is the ECU, PCV, and Shifter linkage. I did everything the seller told me to do. That was the 1st Thing i actually did. After that did not solve the problem. I decided to ask for some help and advice. From every one on the forum. The seller says the chip, the mass air flow, everything is in good working condition. If every thing is fine though why is it still acting up. If i could return the car i would.

I doubt that will happen though. So i will sort everything out. Until i run out of funds. Then sell the car.

11-13-2009	#2
Alpha D Got Boost o_O'' m Join Date: Sep 2009 Location: In a house Drives: 1991 Eagle Talon TSI AWD Spooling Fiddy Trim Style Posts: 1,389	Re: 1G Trouble shoot assistance needed No. Thats not the problem. I already replaced the Intake manifold. I already replaced the o rings as well as upper injector seals. The only thing i have not done yet is the ECU, PCV, and Shifter linkage. I did everything the seller told me to do. That was the 1st Thing i actually did. After that did not solve the problem. I decided to ask for some help and advice. From every one on the forum. The seller says the chip, the mass air flow, everything is in good working condition. If every thing is fine though why is it still acting up. If i could return the car i would. I doubt that will happen though. So i will sort everything out. Until i run out of funds. Then sell the car.