MitsuStyle - View Single Post

2bar1g · 10-13-2009

I see I deleted all the info on the first post.

Tiny bit of side to side shaft play, but will go away once oiled.

Has a clipped tdo6 turbine wheel
Garrett e60 compressor wheel
3" inlet
40mm hks wg w/15lb spring
3" o2 housing

http://www.turbochargers.com/tech/

Rated at 750cfm, fp green is at 730.

10-13-2009	#6
2bar1g Member Join Date: Nov 2007 Location: . Drives: . Posts: 127	Re: TDO6 Frank 4 60 trim w/o2 housing and WG I see I deleted all the info on the first post. Tiny bit of side to side shaft play, but will go away once oiled. Has a clipped tdo6 turbine wheel Garrett e60 compressor wheel 3" inlet 40mm hks wg w/15lb spring 3" o2 housing http://www.turbochargers.com/tech/ Rated at 750cfm, fp green is at 730.