MitsuStyle - View Single Post

**4seasons69** · 09-20-2009

you should be able to pry the dust seals off with a screw driver or a small pry bar. and front wheel bearings are usually one sealed unit. you usually press the hub out of the bearing so and then the bearing out of the hub. so it doesn't bust apart like that but it's not a big deal. just have the race pressed off of the hub then remove the snapring and have the bearing pressed out of the knuckle. and then have the new bearing pressed back in then have the hub pressed in

09-20-2009	#8
4seasons69 Join Date: Apr 2007 Location: Circle Pines Drives: 1992 talon tsi 1995 corolla Posts: 2,048	Re: Hub bearings? you should be able to pry the dust seals off with a screw driver or a small pry bar. and front wheel bearings are usually one sealed unit. you usually press the hub out of the bearing so and then the bearing out of the hub. so it doesn't bust apart like that but it's not a big deal. just have the race pressed off of the hub then remove the snapring and have the bearing pressed out of the knuckle. and then have the new bearing pressed back in then have the hub pressed in Last edited by 4seasons69; 09-20-2009 at 05:48 PM..