MitsuStyle - View Single Post - Anyone else ever get the compressor tester hose stuck in their cyl head

Pushit2.0 · 09-10-2009

A little less cow bell next time you thread the hose into the head, the threads do most of the sealing and the o-ring takes care of the rest. It sounds like the hose is turning but the threaded part is not. So pull really hard and turn or pull hard enough to pull the hose off the threaded part, then use a needle noise vice grip to pull the fitting out of the head.

~John

09-10-2009	#6
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Anyone else ever get the compressor tester hose stuck in their cyl head A little less cow bell next time you thread the hose into the head, the threads do most of the sealing and the o-ring takes care of the rest. It sounds like the hose is turning but the threaded part is not. So pull really hard and turn or pull hard enough to pull the hose off the threaded part, then use a needle noise vice grip to pull the fitting out of the head. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.