MitsuStyle - View Single Post

Pushit2.0 · 08-24-2009

The port job on the head was touched up, the valves are ground, and the valve job should be done in the next couple of days. Then shim the springs a little tighter, 1 exhaust rocker came off and almost put a hole in the head. Then deck it and bolt it back down. I will be working on the exhaust manifold Tuesday tonight.

~John

08-24-2009	#16
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: 91 Galant VR4 The port job on the head was touched up, the valves are ground, and the valve job should be done in the next couple of days. Then shim the springs a little tighter, 1 exhaust rocker came off and almost put a hole in the head. Then deck it and bolt it back down. I will be working on the exhaust manifold Tuesday tonight. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012. Last edited by Pushit2.0; 08-25-2009 at 10:53 AM..