MitsuStyle - View Single Post

Pushit2.0 · 06-02-2009

It will cost you another re-torque on the rod bolts, which if you do not have the original length of the bolts then after 3-4 torques it is recommended to replace them. But if you have the original length measurement and they have not stretched over X amount, the spec is different per company, then you can re-use the rod bolts.

~John

06-02-2009	#18
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Over revving issue It will cost you another re-torque on the rod bolts, which if you do not have the original length of the bolts then after 3-4 torques it is recommended to replace them. But if you have the original length measurement and they have not stretched over X amount, the spec is different per company, then you can re-use the rod bolts. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.