MitsuStyle - View Single Post - which way to mount balance belt tensioner?

Pushit2.0 · 05-07-2009

The lip of the balance shaft tensioner pulley should be on the out side, as the lip of the pulley on the crank is twards the block, thus making sure the belt rides in the middle. You could also look at the pulley you took off to see which side the bolt head tighten onto vs the flat surface of the front cover.

~John

05-07-2009	#2
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: which way to mount balance belt tensioner? The lip of the balance shaft tensioner pulley should be on the out side, as the lip of the pulley on the crank is twards the block, thus making sure the belt rides in the middle. You could also look at the pulley you took off to see which side the bolt head tighten onto vs the flat surface of the front cover. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012. Last edited by Pushit2.0; 05-07-2009 at 12:55 AM..