MitsuStyle - View Single Post

xveganxcowboyx · 10-05-2008

I have a running 6 bolt long block. Untouched with ~140k on it. Leak down showed some ring loss. Only a little valve loss. Make an offer.

Also have 6 bolt short block. .020 over with 2G pistons. Crank is almost certainly out of spec. Was running, but knocking when pulled. Make an offer. (probably not as virgin as you would like...)

10-05-2008	#4
xveganxcowboyx Wanker Join Date: Nov 2005 Location: St Paul, MN Drives: 95 M3 Posts: 1,027	Re: 6 bolt blocks/heads I have a running 6 bolt long block. Untouched with ~140k on it. Leak down showed some ring loss. Only a little valve loss. Make an offer. Also have 6 bolt short block. .020 over with 2G pistons. Crank is almost certainly out of spec. Was running, but knocking when pulled. Make an offer. (probably not as virgin as you would like...)