MitsuStyle - View Single Post - Post your turbo, timing, fuel and fuel ratio!

blackrosenova400 · 10-01-2008

Ok well I went out and adjusted my base timing to 0 degrees BTDC.

Jeff at Keydiver has my max timing advance to 19-20 degrees.

I think it ran pretty dam good and I dont think it pushed any coolant at all. So either my timing is too high or my head gasket just cant handle the cylinder pressure.

The computer has no idea what the base timing is so if the logger says 19-20 with the base timing of 0, what am I really at?

What am I really at when im at when im at a base of 5 degrees BTDC and logger says 20?

If the computer assumes im at 5 then with my base at 5 my peak is 20

If the computer doesnt assume 5 then with my base at 5 my peak is 25

10-01-2008	#35
blackrosenova400 1992 Champion! Ace Blackjack Champion! Asteroid Miner Champion! Billards Champion! Bowling Champion! Bowling Master Champion! Classic Frogger Champion! Donkey Kong Champion! Gauntlet 2 Champion! K Tire Racing Champion! Luigis Mansion Champion! Penguin Shot Champion! Ten Pin Bowling Champion! UrbanSlug Champion! Yeti Strikes Back Champion! Join Date: Nov 2006 Location: Belle Plaine Posts: 1,150	Re: Post your turbo, timing, fuel and fuel ratio! Ok well I went out and adjusted my base timing to 0 degrees BTDC. Jeff at Keydiver has my max timing advance to 19-20 degrees. I think it ran pretty dam good and I dont think it pushed any coolant at all. So either my timing is too high or my head gasket just cant handle the cylinder pressure. The computer has no idea what the base timing is so if the logger says 19-20 with the base timing of 0, what am I really at? What am I really at when im at when im at a base of 5 degrees BTDC and logger says 20? If the computer assumes im at 5 then with my base at 5 my peak is 20 If the computer doesnt assume 5 then with my base at 5 my peak is 25 Last edited by blackrosenova400; 10-01-2008 at 11:03 PM..