MitsuStyle - View Single Post

sleepydsm · 07-15-2008

I had a bad experience with John Gosh.

The 2nd head he did for me, the valve guide-valve clearance was way too huge(max Mitsu spec is .003 and the spec was .006!!!, thats 100% LARGER than it should be), and the 1 year old valve stems were falling off/garter springs gone/etc.

I was really pissed to find out I spent $500 for a basic refreshed head and got shitty quality work this time around.

07-15-2008	#8
sleepydsm Kevin Join Date: Jan 2004 Location: Shoreview Posts: 3,356	Re: 92 Talon Tsi AWD (siezed oil pump) I had a bad experience with John Gosh. The 2nd head he did for me, the valve guide-valve clearance was way too huge(max Mitsu spec is .003 and the spec was .006!!!, thats 100% LARGER than it should be), and the 1 year old valve stems were falling off/garter springs gone/etc. I was really pissed to find out I spent $500 for a basic refreshed head and got shitty quality work this time around. __________________ Misses the Mitsu Community Currently on Corvette #4