Thread: Degreeing Cams
View Single Post
Old 10-27-2003   #3
vassil
Been there, done that.
 
vassil's Avatar
 

Join Date: Oct 2003
Location: Winona, MN
Posts: 130
Send a message via MSN to vassil
Shane,

I just ordered my 3" downpipe today. I know ... I am modifying the car in
somewhat weird order

The engine as on now has 507 miles on it. The idle is very bad. I have checked
for boost leaks, timing & base idle. My vacuum @ idle is about 10in/hg. It used
to be around 20 before. I cannot get the car to idle right for the life of me.

The only thing left are the cams not being degreed. I have heard from some
people that Fidanza Camgears are off by a few degrees. Either way I just need
them zero-ed. I do not have a degree wheel but I do have 2 solid lifters from
CRCO which I can bring.

Right now I am not really interested in power. I just want things nuts on with the
car.

--Vassil
__________________
Manual 859.8WHP / 642 ft/lbs
10.23@152
Automatic 728WHP / 517 ft/lb
9.85@143

1G DSM Crossmembers
BulFab
vassil is offline   Reply With Quote