MitsuStyle - View Single Post

**asshanson** · 04-28-2008

I am just watching the boost on my gauge which reads pretty accurate, hits 16psi by 6k and holds, can't log it yet, but I should get a map sensor in the future for such purposes. The boost is pretty linear, 5psi by 4k, 10psi by 5k, 16psi by 6k, which is weird.

Standard 92 pump for gas, no e85 for me. I put in the basic settings for my injectors, messed with dead time a bit for the low trim and I got them within 2% of zero. I'll keep logging the next few days and see if they change much.

Once I fixed my timing my airflow per rev went from .37 down to .32 or so, much better according to the link manual.

04-28-2008	#192
asshanson immune from paybans Join Date: Oct 2005 Location: West Des Moines Drives: poorly Posts: 4,358	Re: Make slowboy not so slow I am just watching the boost on my gauge which reads pretty accurate, hits 16psi by 6k and holds, can't log it yet, but I should get a map sensor in the future for such purposes. The boost is pretty linear, 5psi by 4k, 10psi by 5k, 16psi by 6k, which is weird. Standard 92 pump for gas, no e85 for me. I put in the basic settings for my injectors, messed with dead time a bit for the low trim and I got them within 2% of zero. I'll keep logging the next few days and see if they change much. Once I fixed my timing my airflow per rev went from .37 down to .32 or so, much better according to the link manual. Last edited by asshanson; 05-05-2008 at 11:13 AM..