MitsuStyle - View Single Post - Pushing coolant... New L19's or ring head

Pushit2.0 · 04-27-2008

There are 2 L19 stud sets, one set made with the bigger 9/16" thread on the nut (I think Marco has said they were made for him?) Vs the standard ARP stud at 12mm. When ARP made the L19 studs I would guess they just copied the standard ARP stud so they might not handle as much torque as the 9/16" studs.

~John

04-27-2008	#2
Pushit2.0 15min late to the world 12 Babes of Christmas Champion! 3D Championship Golf Champion! Drag Race Champion! Drifting Champion! Duck Hunter Champion! Street Racer Champion! Tire Toss Champion! Join Date: Oct 2003 Location: getting a monster Drives: a moon taxi Posts: 3,692	Re: Pushing coolant... New L19's or ring head There are 2 L19 stud sets, one set made with the bigger 9/16" thread on the nut (I think Marco has said they were made for him?) Vs the standard ARP stud at 12mm. When ARP made the L19 studs I would guess they just copied the standard ARP stud so they might not handle as much torque as the 9/16" studs. ~John __________________ Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.