MitsuStyle - View Single Post

TkrPerformance · 04-09-2008

here is the fix for the loose flywheel. used the 2.4 auto spacer ring and tacked the bolts after they were torqued down so they will not come loose a 2nd time.

the new PTT t.o. bearing that you need to put the oem backing plate one

after I cut apart the oem t.o. bearing and pressed it on to the PTT bearing. It is so nice to have a 12ton shop press to do stuff like this and not have to pay for it.

04-09-2008	#3
TkrPerformance Join Date: Oct 2003 Location: edward lake Drives: toaster Posts: 6,431	Re: the evo 3 swap parts are coming here is the fix for the loose flywheel. used the 2.4 auto spacer ring and tacked the bolts after they were torqued down so they will not come loose a 2nd time. the new PTT t.o. bearing that you need to put the oem backing plate one after I cut apart the oem t.o. bearing and pressed it on to the PTT bearing. It is so nice to have a 12ton shop press to do stuff like this and not have to pay for it.