MitsuStyle - View Single Post

**asshanson** · 02-08-2008

Well I ordered some parts to finish up the car:

DSMLink
FP4 cams
AEM wideband
Oil pressure gauge
Water temp gauge

Swapping in the PTE 61 this weekend, and probably installing the SS clutch line and new slave. The transmission swap and doing work on the GSX will have to wait until it gets warmer.

I talked with a few people at FP and they said I should be fine on Crower singles with the FP4 cam, as long as I'm running medium boost levels (under 30) and not making 600 whp or something crazy. Also since I'm only going to rev to 8000rpm it's not quite so risky.

02-08-2008	#7
asshanson immune from paybans Join Date: Oct 2005 Location: West Des Moines Drives: poorly Posts: 4,358	Re: Make slowboy not so slow Well I ordered some parts to finish up the car: DSMLink FP4 cams AEM wideband Oil pressure gauge Water temp gauge Swapping in the PTE 61 this weekend, and probably installing the SS clutch line and new slave. The transmission swap and doing work on the GSX will have to wait until it gets warmer. I talked with a few people at FP and they said I should be fine on Crower singles with the FP4 cam, as long as I'm running medium boost levels (under 30) and not making 600 whp or something crazy. Also since I'm only going to rev to 8000rpm it's not quite so risky. Last edited by asshanson; 02-08-2008 at 04:19 PM..