MitsuStyle - View Single Post

**scheides** · 02-07-2008

LOL Mark! That's funny! Well THANK YOU to Mark and his dad for helping out extracting that bolt. I've dealt with this in the past on the front side of the motor, but I was out of steam on this one. Took 1.5 hours of grinding with a diamond bit, but they got it out!

Manifold is ON and SOLID! I boost leak tested to 30psi, holds dandy! I need to re-route some of my vacuum lines, get some proper vacuum caps, and do a little more of a wire tuck, but so far all is well. My tune is WAY out of whack now, but after a decent test drive with Kracka and Kevin, the car feels solid, and so far no CEL after unhooking the EGR and all associated lines.

02-07-2008	#14
scheides flips McGee Cribbage Square Champion! Great Mahjong: Classic Champion! Mah Jongg Solitaire Champion! Mahjong Connect Champion! MuMu Champion! Join Date: May 2004 Location: Minneapolis, MN Drives: BeaterX Posts: 12,900	Re: Project Porting! Pics! LOL Mark! That's funny! Well THANK YOU to Mark and his dad for helping out extracting that bolt. I've dealt with this in the past on the front side of the motor, but I was out of steam on this one. Took 1.5 hours of grinding with a diamond bit, but they got it out! Manifold is ON and SOLID! I boost leak tested to 30psi, holds dandy! I need to re-route some of my vacuum lines, get some proper vacuum caps, and do a little more of a wire tuck, but so far all is well. My tune is WAY out of whack now, but after a decent test drive with Kracka and Kevin, the car feels solid, and so far no CEL after unhooking the EGR and all associated lines.