MitsuStyle - View Single Post

**scheides** · 12-09-2007

If the MAF signal does not deviate from 3, it sounds like there is a problem with the MAF-T. I had this problem before, and if it's solid at 3hz, something is goofy with it. Mine had a leaky cover and was getting moisture inside the box.

So, clean that out, check the wiring, and if that doesn't work, try hooking up/plugging in a stock MAS.

12-09-2007	#14
scheides flips McGee Cribbage Square Champion! Great Mahjong: Classic Champion! Mah Jongg Solitaire Champion! Mahjong Connect Champion! MuMu Champion! Join Date: May 2004 Location: Minneapolis, MN Drives: BeaterX Posts: 12,900	Re: having N00b problems..... If the MAF signal does not deviate from 3, it sounds like there is a problem with the MAF-T. I had this problem before, and if it's solid at 3hz, something is goofy with it. Mine had a leaky cover and was getting moisture inside the box. So, clean that out, check the wiring, and if that doesn't work, try hooking up/plugging in a stock MAS.