MitsuStyle - View Single Post

**JET** · 10-24-2007

Spring and retainer choice is overrated on a 2.4, if you aren't going much over 8k rpm. I run crower single springs on my crower 415's with well over .500" of lift without a problem. I would say 280's are the minimum you should go. If you plan on going to a bigger turbo any time, then I would go bigger. I would probably look at the FP3 cams or BC 288's. Big cams for a 2.0 become much more mild in a 2.4.

10-24-2007	#5
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: Which cams? Spring and retainer choice is overrated on a 2.4, if you aren't going much over 8k rpm. I run crower single springs on my crower 415's with well over .500" of lift without a problem. I would say 280's are the minimum you should go. If you plan on going to a bigger turbo any time, then I would go bigger. I would probably look at the FP3 cams or BC 288's. Big cams for a 2.0 become much more mild in a 2.4. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!