Quote:
Originally Posted by BuildADSM
Cool! How did you decide to put the bumper support directly on the IC?
I assume that you didn't want to go wider because you wanted to keep the stock fogs instead of going aftermarket.... or is there another reason?
Any cooling issues?
Looks great man!
|
Well it's not directly on it, there's about a 1/4 inch gap at the top. Really came down to making sure the core didn't hang too low on the car. The tight fit at the top was just a benefit. Yeah, I wanted to keep the fog lights (it is a street car). I like keeping the outside appearance as stock looking as possible. Other than the FMIC and the exhaust it looks like any other 2g with nice wheels and tint. This core is supposed to work really well and I didn't want the end tanks to be too shallow/tight to the core. I wanted the air flow to make a smoother transition from the pipes to the core. Drove it home yesterday, no signs of overheating at this time.
__________________
"You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance."
When she get's bitchy, SPANK THAT ASS!
(#Y#)