MitsuStyle - View Single Post

Swifty1638 · 10-15-2007

I used a pry bar to dent the pipe, and I also forced it, by bolting up my old 61. as for the lines, I pinched the openings on the water pipe, and then welded them shut. Also, remember to feed the turbo oil from the oil filter housing, and not the head. You'd feed from the head if it was a BB, but not when it's only oil-cooled.

-A. Swift

10-15-2007	#5
Swifty1638 Unsure resident asshole Join Date: Mar 2005 Location: MN Drives: '92 Eagle TalonTSI w/many mods Posts: 3,696	Re: turbo install ??'s I used a pry bar to dent the pipe, and I also forced it, by bolting up my old 61. as for the lines, I pinched the openings on the water pipe, and then welded them shut. Also, remember to feed the turbo oil from the oil filter housing, and not the head. You'd feed from the head if it was a BB, but not when it's only oil-cooled. -A. Swift __________________ Black 1GB Mafia #1 744AWHP/526TQ-Shootout mode 639.6AWHP/452TQ-DB's dyno I wanna go fast.