MitsuStyle - View Single Post

**JET** · 09-30-2007

There is going to be a little extra slop in the holes, so it won't locate as easy. Leave a few nuts off the outside studs and make sure the stud is in the center of the hole, then tighten down the inside ones. Then do the outside. It is pretty critical, so be careful.

09-30-2007	#2
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: Head Question There is going to be a little extra slop in the holes, so it won't locate as easy. Leave a few nuts off the outside studs and make sure the stud is in the center of the hole, then tighten down the inside ones. Then do the outside. It is pretty critical, so be careful. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!