MitsuStyle - View Single Post

iceminion · 08-12-2007

I was hoping on having a wastegate actuator open the TB, I know that there is only about an inch of travel from the wastegate, so it will be tricky to make the TB open all the way.

A Y pipe may work out a little better.

The tiny exhaust side of the T25 will only be in play under low boost, I will have a cutout in front of the T25 so under high boost/RPM all the air will bypass the T25 completely.

08-12-2007	#16
iceminion Join Date: Oct 2004 Location: Maple Grove Posts: 956	Re: Galant VR4 I was hoping on having a wastegate actuator open the TB, I know that there is only about an inch of travel from the wastegate, so it will be tricky to make the TB open all the way. A Y pipe may work out a little better. The tiny exhaust side of the T25 will only be in play under low boost, I will have a cutout in front of the T25 so under high boost/RPM all the air will bypass the T25 completely. __________________ building a 3000GT AWD Turbo.