MitsuStyle - View Single Post

**JET** · 06-27-2007

Jeez, newbs helping newbs. No, you don't have to separate the axles from the hubs, just undo the 2 bolts between the strut and the hub. Niterydyr is right for the T-case and you also need to get the DP out of the way, the t-case sits right beside it. There are also 2 bolts holding the intermediate shaft on (drivers side axle) if you haven't found them yet, 14mm.

06-27-2007	#27
JET Is funding Exxon. Join Date: Oct 2003 Location: Ham Lake Drives: like a bat outta hell! Posts: 7,983	Re: removing the awd system from tranny Jeez, newbs helping newbs. No, you don't have to separate the axles from the hubs, just undo the 2 bolts between the strut and the hub. Niterydyr is right for the T-case and you also need to get the DP out of the way, the t-case sits right beside it. There are also 2 bolts holding the intermediate shaft on (drivers side axle) if you haven't found them yet, 14mm. __________________ Is burning corn and stayin' warm! My motorcycle is stock and reliable, my Talon is neither!