MitsuStyle - View Single Post

niterydr · 06-26-2007

Wow.
Transfer case is held on by 5 bolts. That might need some coaxing to get it off the output shaft. Then make sure to support the center driveshaft.
On the front passanger side axle
It would be best to pry alongside the axle/transmission meeting point UNDER the car as there is a bit more room for a pry-bar/even application. A quick "pop" motion should dislodge the axle from the transmission.
Good luck.

06-26-2007	#6
niterydr back in the saddle again 24 Hours Rally Champion! 3D Pacman white house edition Champion! 3D Racing - Track 2 Champion! ATV Winter Challenge Champion! Bloody Pingu Champion! WRX Racing 2 Champion! Tournaments Won: 5 Join Date: Oct 2003 Location: Elkhart Texas Drives: 2015 Ram Quad Cab Hemi, 1999 FRC Corvette, 93 Stealth Turbo Posts: 6,411	Re: removing the awd system from tranny Wow. Transfer case is held on by 5 bolts. That might need some coaxing to get it off the output shaft. Then make sure to support the center driveshaft. On the front passanger side axle It would be best to pry alongside the axle/transmission meeting point UNDER the car as there is a bit more room for a pry-bar/even application. A quick "pop" motion should dislodge the axle from the transmission. Good luck. __________________ My street car runs low 11's and my race car's personal best is a mid 11....