[driftn1g]

Ok ill check that..

Right now everything is basically disassembled besides the speedo cable and one downpipe nut to seperate the exhaust..

how should i go about taking out the speedo cable?? i looked at the tranny and theres one nut holding it on.. i pull the nut and its still locked in there.. i cant remember exactally what i did before, but last time i think i lost some pin inside the thing pulling it from the tranny..

Also i pulled one of the two nuts off the 02 housing to downpipe.. the other one just wont come off.. i took alot of PB blaster to it.. i have no air tools.. so i dont know what i should do...


Thanks