MitsuStyle - View Single Post

**1ViciousGSX** · 06-14-2007

Are the dowls there?
Put the rear main seal in the housing with a very thin film of sealant around it, then put the housing on with a very thin film of sealant and let the crank line it up for you, then tighten it down. Let it fully cure. Then bolt down the oil pan.

p.s. And don't use so much sealant on the surface. All you need is a slight film on it.

06-14-2007	#17
1ViciousGSX Admin Join Date: Oct 2003 Location: Sportsman's Paradise, LA. Posts: 5,382	Re: Help..... Sos!!! Are the dowls there? Put the rear main seal in the housing with a very thin film of sealant around it, then put the housing on with a very thin film of sealant and let the crank line it up for you, then tighten it down. Let it fully cure. Then bolt down the oil pan. p.s. And don't use so much sealant on the surface. All you need is a slight film on it. __________________ My new band: Fall of August Click Me --> "V" <-- Click Me "You don't have a clue. You couldn't get a clue during the clue mating season in a field full of horny clues if you smeared your body with clue musk and did the clue mating dance." When she get's bitchy, SPANK THAT ASS! (#Y#)